Subject:
Steps to use if there is an audible alarm on the server.
Details:
1. Verify the controller firmware is at the current revision since there have been bugs with older firmware versions that could cause the alarm to activate.
2. Reboot the system and see when the alarm activates. If it activates as soon a the controller BIOS is loaded then it would indicate a problem on the controller.
3. Check the controller BIOS for any settings that would activate the alarm.
4. Gather LSI logs and engage with LSI/Avago support to determine if there is a hardware failure.
OR
You can permanently silence the alarm using the "Hardware Controller Silence Alarm" window in the Quantastor GUI.
Please use the links below for additional details:
Comments